DJI Agras T70P
Coming Spring 2027
Explore the Agras T70P on DJI’s website
DJI Agras T70P Specifications
- Spray tank
-
18.5 US gal
70 L - Dry spreader
-
26.4 US gal
100 L hopper - Max spray flow
-
10.6 gal/min
40 L/min with 4 nozzles - Max lift
-
143 lb
65 kg including rigging
Aircraft and propulsion
| Aircraft weight with battery | DB1580 · 115 lb (52 kg) DB2160 · 123 lb (56 kg) |
|---|---|
| Fully folded | 45.7 × 35.4 × 37.8 in (1160 × 900 × 960 mm) |
| Arms open, propellers folded | 71.7 × 82.7 × 37.8 in (1820 × 2100 × 960 mm) |
| Arms and propellers open | 126.0 × 138.6 × 37.8 in (3200 × 3520 × 960 mm) |
| Diagonal wheelbase | 96.1 in (2,440 mm) |
| Propellers | Four 62 in carbon fiber composite propellers |
| Motors | 155 × 22 mm stator, 65 rpm/V |
| Hovering accuracy with strong GNSS | With RTK · ±10 cm horizontal and vertical Without RTK · ±0.6 m horizontal and ±0.3 m vertical |
| Max configurable flight radius | 1.24 mi (2 km) |
| Operating temperature | 32–104 °F (0–40 °C) |
| Rated wind resistance | Less than 6 m/s (about 13.4 mph) |
Maximum takeoff weight by battery
| Spraying with 2 nozzles | DB1580 · 225 lb (102 kg) DB2160 · 278 lb (126 kg) |
|---|---|
| Spraying with 4 nozzles | DB1580 · 231 lb (105 kg) DB2160 · 287 lb (130 kg) |
| Spreading | DB1580 · 278 lb (126 kg) DB2160 · 287 lb (130 kg) |
| Lifting | DB1580 · 254 lb (115 kg) DB2160 · 261 lb (118.5 kg) |
DJI measured these limits at sea level. The DJI Agriculture app recommends a load for the aircraft, task and operating conditions.
Spraying system
| Tank | 18.5 US gal (70 L), HDPE |
|---|---|
| Max liquid payload | Up to 154 lb (70 kg), depending on configuration and conditions |
| Nozzles | 2 nozzles standard, 4 total with the optional setup Standard nozzle model · LX07550SX Optional mist nozzle model · LX09550SX |
| Max flow | 2 nozzles · 7.9 US gal/min (30 L/min) 4 nozzles · 10.6 US gal/min (40 L/min) |
| Effective spray width | 13.1–36.1 ft (4–11 m), depending on field conditions |
| Droplet size | 50–500 μm |
| Rear nozzle spacing | 73.8 in (1,874 mm) |
| Delivery pumps | Two magnetic-drive impeller pumps |
Spreading System 4.0
| Hopper capacity | 26.4 US gal (100 L) |
|---|---|
| Max hopper load | 154 lb (70 kg) |
| Discharge system | Auger-fed centrifugal disc |
| Max discharge | 882 lb/min (400 kg/min) with compound fertilizer |
| Effective spread width | 9.8–32.8 ft (3–10 m) |
| Granule sizes by auger | Standard extra-large · 0.5–10 mm Standard medium · 4–6 mm Optional large · 4–10 mm Optional small · 0.5–4 mm |
Effective spread width varies with the material, flight height and disc speed.
Lifting and Safety System 3.0
| Max lifting load | 143 lb (65 kg), including the rope and hook |
|---|---|
| Lifting cable | 32.8 ft (10 m) standard 32.8–49.2 ft (10–15 m) recommended by DJI |
| Obstacle sensing | Tri-vision plus front and rear millimeter-wave radar |
| Published sensing range | Up to 197 ft (60 m) |
| Rated obstacle-avoidance speed | Up to 30.9 mph (13.8 m/s) under DJI test conditions |
| Published obstacle-avoidance height | At least 4.9 ft (1.5 m) |
| Braking clearance | 8.2 ft (2.5 m) after braking and settling into a hover |
Sensing performance depends on lighting, weather and the type and position of obstacles. See DJI’s full operating notes below.
Flight batteries, generator and charger
| DB1580 battery | 30 Ah at 52 V · 25.8 lb (11.7 ± 0.3 kg) |
|---|---|
| DB2160 battery | 41 Ah at 52 V · 32.4 lb (14.7 ± 0.3 kg) |
| DB2212 battery | 41 Ah at 52 V · 33.1 lb (15.0 ± 0.3 kg) |
| D14000iE generator | 9.65 kW DC charging output (42–61.6 V) 1.5 kW auxiliary AC output at 220 V |
| Generator size and fuel tank | 29.8 × 27.7 × 26.7 in (757 × 704 × 677 mm) 192 lb (87 ± 0.5 kg) 7.9 US gal (30 L) fuel tank |
| C12000 smart charger | 12 kW at 380 V three-phase 3 kW at 220 V single-phase |
| Compatible batteries listed for D14000iE and C12000 | DB1580 and DB2160 |
| DJI fast-charge benchmark, 30% to 95% | DB1580 · 7–8 minutes DB2160 · 8–9 minutes |
DJI’s fast-charge benchmark is measured at sea level at 59–104 °F (15–40 °C) ambient temperature. Charge time depends on available input power and battery conditions.
Remote controller, relay and RTK
| TKPL 2 controller display | 7 in LCD touchscreen · 1920 × 1200 · 1,400 cd/m² |
|---|---|
| Controller battery runtime | 3.8 hours on the internal battery 3.2 hours on the external battery |
| Controller charging | USB-C, up to 65 W at up to 20 V About 2 hours with the controller powered off using the standard DJI charger |
| Relay | 5-hour rated runtime · IP55 FCC signal range up to 5.0 mi (8 km) under DJI test conditions |
| D-RTK 3 AG | 7-hour rated runtime · IP67 FCC signal range up to 9.3 mi (15 km) under DJI test conditions |
| D-RTK 3 AG network RTK accuracy | Horizontal · 0.8 cm + 1 ppm RMS Vertical · 1.5 cm + 1 ppm RMS |